|Power supply voltage / fuse||11 ÷ 15 VDC / 2 x 30A|
|Operating power supply voltage||6.5 ÷ 17.5 VDC|
|Idling current||1.68 A|
|Standby Current Draw||1.7 mA|
|Consumption @ 14.4 VDC, 2Ω, Max Musical Power||45 A|
|Remote IN||4 ÷15 VDC (1 mA)|
|Remote OUT||6.5 ÷15 VDC (150 mA)|
|ART - Automatic Remote Turn on/ off from OUTPUT BTL speakers||1.5 VDC|
|Efficiency Rated Power||80%|
|Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power||0.03%|
|Bandwidth @ -1.5 dB||10 Hz ÷ 42 kHz|
|Damping factor @ 1 kHz, 4Ω, 2 VRMS||80|
|S/N ratio (A weighted @ 1 V Input) Master Input||98 dBA|
|S/N ratio (A weighted @ 1 V Input) Optical Input||105|
|Total Power RMS||1080 W|
|Minimum load impedance||12Ch: 2Ω | 6Ch – (Bridge 1/2; 3/4; 5/6; 7/8; 9/10; 11/12): 4Ω|
|Output Continuous Power (RMS) @14.4 VDC, 1% THD||
12 Ch @ 4Ω: 60 W x 12
12 Ch @ 2Ω: 90 W x 12
6 Ch (Bridge 1/2; 3/4; 5/6; 7/8; 9/10; 11/12) @ 4Ω: 180 W x 6
|Output power @ 4Ω, 1% THD+N, 14.4 V||45 W|
|SN ratio (ref. 1W output)||75.5 dB|
|Pre-In Inputs||0.6 ÷ 6 VRMS (15 kΩ Imp.)|
|Hi Level Inputs||8|
|Low Level Inputs||8|
|Speaker-In Inputs||2.2 ÷ 22 VRMS (5 Ω Imp.)|
|Digital IN||1 x Optical S/PDIF; Max 192 kHz / 24 bit + 1 x Optical/Coaxial S/PDIF with optional F2O card|
|Sub Out (RCA Pre Out)||5V RMS|
|Audio DSP Converter||Analog Devices ADAU1467 automotive qualified audio processor. Processing @ 96 kHz.Analog Devices 3 x ADAU1978 (4ch) and ADAU1966A (16ch) A/D and D/A converters (24 bit/192 kHz) providing very high level performance|
|Filter type||Full / High-Pass / Low-Pass / Band-Pass|
|Filter mode and slope||
Linkwitz-Riley @ 12/24/36/48 dB/Oct.
Butterworth @ 6/12/18/24/30/36/42/48 dB/Oct.
Bessel @ 6/12/18/24/30/36/42/48 dB/Oct.
Chebyshev @ 6/12/18/24/30/36/42/48 dB/Oct.
QLP @ 6 dB/Oct.
|Crossover frequency||20 Hz ÷ 20 kHz|
|Phase control||0° / 180°, All-Pass filters|
|Analog Input Equalizer (20 ÷ 20k Hz)||12 Biquad + Delay|
|Output Equalizer||Parametric/Graphic Biquad: 15 poles, 20 Hz ÷ 20 kHz|
|Time Alignment Distance||0 ÷ 510 cm / 0 ÷ 200.8 inches|
|Time Alignment Delay||0 ÷ 15 ms|
|Input Output Real Time Audio Monitor||RTA|
|DRC Port||Input for DRC AC remote control (Optional)|
|ADC Port||Manage other Audison devices that support this standard|
|1 Wire||Customizable functions (+ 12 V activated)|
|2 Wire||Customizable functions (+ 12 V activated)|
|PC connections||Micro USB 1.1 / 2.0 / 3.0 Compatible|
|Software/PC requirements||Windows 10, Windows 11 (min. res. 1024 x 768)|
|Ambient operating temperature range||0 °C to 55 °C (32 °F to 131 °F)|
|Size||240 x 47 x 156 / 9.44 x 1.85 x 6.14|
The F2O accessory is a digital input extension card, compatible with the new line of Audison AF bit amplifiers with integrated Dsp.
The card fits the dedicated external slot of the AF bit amplifier and it adds an additional Coaxial S/PDIF or a second Toslink S/PDIF input. The type of additional input can be selected by the switch mounted over the card itself.
In case the Coaxial S/PDIF input is selected, it is possible to use the Coaxial input cable included in the card box.
The F4IN accessory is an analog input extension card, compatible with the new line of Audison AF bit amplifiers with integrated Dsp. The card fits the dedicated external slot of the AF bit amplifier and adds four analog high-level input channels to the AF bit native eight, thus reaching twelve high-level (SPK IN) inputs.
With respect to the sensitivity range of the AF bit native eight SPK IN inputs (2.2 ÷ 22 VRMS), the F4IN features 3.2 ÷ 32 VRMS to allow a perfect integration in advanced OEM systems with higher voltages.
This Plug&Play T-Harness provides the ability to install an Audison AF bit amplifier on BMW vehicles equipped with RAM module. It is compatible with "Standard" and "Hi-Fi" sound systems. The OEM seven-channel amplifier is connected via a forty-two pin multipolar connector.
AFBMW ReAMP 3 allows AF Forza user to:
1. Retrieve the OEM source front mid/high, rear mid/high, underseat low-pass, and center signals.
2. Route the AF bit amplifier outputs to each of the OEM amplifier seven channels: (Mid-Hi FL; Mid-Hi FR; WF FL; WF FR; RL; RR; Centre)
- The Plug&Play terminals enable the user to choose which AF bit output to connect to each of the seven channels of the OEM audio system.
- It is also possible to bridge the outputs of the AF bit amplifier.
3. Keep the OEM amplifier on.
The AFBMW ReAMP 3 can also be used with the Audison AP F IN ADP accessory (not included in the box) for a full Plug&Play connection to an AP F8.9 bit amplifier.
Next-generation bit Drive software platform – developed for this family of products – simplifies every control and function.
Native DSP working at 24 bit/96 kHz and an extended audio band up to 40 kHz.
The acoustic analysis integrates the response graph into the equalizer display ensuring efficient tuning and great sound, compatible with any 24-bit USB microphone.
The electrical analysis integrates the response graph into the input equalizer display, ensuring efficient tuning.
Electrical Signal Analysis ensures proper integration and correction for each input channel.
Enjoy the improved audio performance of the latest generation Audison D-Class technology.
Maximum versatility thanks to the bridging option for each pair of channels.
Forza amplifiers have two independent power supplies: the audio amplifier power supply is loosely regulated, which allows superior dynamic performance. The DSP power supply is stiffly regulated, which maintains DSP microprocessor operation even during lower-voltage transient states (i.e., start/stop operation).
Quick I/O Configuration speeds up system definition and signal routing.
When connected with Audison B-CON hi-res Bluetooth receiver, this feature manages the Master Volume of the Forza amp thus ensuring full dynamic range signal at the input.
iDatalink Maestro AR native support for a total integration with OEM infotainment.
Equipped with eight analog inputs, to support total connectivity even with the most complex OEM systems.
Automatically sums and reverses OEM equalization.
Input delay compensation of time-delayed factory outputs prior to signal summing.
Allows left and right inputs to match in phase before tuning, even if OEM phase processing has been used.
Universal Speaker Simulator technology on high-level inputs for maximum compatibility with any type of Head-Unit OEM Source.
14 DSP-processed output channels for a total control.
a technician’s most powerful tool
for selecting frequency, channel, slope, and bandwidth
hover the cursor overan icon to see its definition
each core functional areacontains one-click guidance
of the interface controls to the selected channel keepsthe technician always focusedon the proper channel.
(compatible USB microphone required for acoustic RTA function)
Even though we’ve modernized the user interface, key operations are still where Audison veteran dealers expect to find them – but info tips for new icons and embedded help files assist first-timers. The Configuration Wizard makes setup faster than ever, and Audison R&D has upgraded the OEM Integration section and the acoustic Tuning controls section with more powerful tools and capabilities.
Be inspired, sign up now!
Never miss the latest news, tips and tutorials from Audison