DSP Amps
Amplifiers
Processors
Speakers
Subwoofers
Subwoofer Box
Accessories
Merchandising
Back
Home | DSP Amps | Forza | AF M5.11 bit

AF M5.11 bit DSP Amplifier | 1200 W | 11 CH DSP + 4 x 150 W @ 2 ohm + 1 x 600 W @ 2 ohm | D-class Fully Bridgeable

AF M5.11 bit boasts five high-fidelity amplified channels 100W x 4 + 400W @4Ω*, 150WP x 4 + 600W @2Ω* with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package! This is combined with native DSP working at 24 bit/96 kHz, extending the audio band up to 40 kHz and earning the coveted High-Resolution certification. Bridging channel pairs results in 200W x 2 + 400W @4Ω*, guaranteeing flexible and powerful performance. Support for the Audison B-CON’s Absolute Volume function guarantees maximum bit depth, even with wireless connections! Output Continuous Power (RMS) @14.4 VDC, 1% THD, all channels driven.

Amplifier Tech Data

Channels 5
Class D-Class
Power supply voltage / fuse 11 ÷ 15 VDC / 2 x 30A
Operating power supply voltage 6.5 ÷ 17.5 VDC
Idling current 1.5 A
Standby Current Draw 1.5 mA
Consumption @ 14.4 VDC, 2Ω, Max Musical Power 53.4 A
Remote IN 4 ÷15 VDC (1 mA)
Remote OUT 6.5 ÷15 VDC (150 mA)
ART - Automatic Remote Turn on/ off from OUTPUT BTL speakers 1.5V DC
Efficiency Rated Power 80.5%

Amplifier Stage

Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power 0.02%
Bandwidth @ -1.5 dB 10 Hz ÷ 42 kHz
Damping factor @ 1 kHz, 4Ω, 2 VRMS 100 kHz , 4Ω, 2 VRMS SUB Channel): 140 | 1 kHz , 4Ω, 2 VRMS: 140
S/N ratio (A weighted @ 1 V Input) Master Input 98 dBA
S/N ratio (A weighted @ 1 V Input) Optical Input 105
Total Power RMS 1200 W
Minimum load impedance
Output Continuous Power (RMS) @14.4 VDC, 1% THD 5 Ch @ 4Ω: 100 W x 4 + 400 W x 1

5 Ch @ 2Ω: 150 W x 4 + 600 W x 1

3 Ch (Bridge 1/2; 3/4) @ 4Ω: 300 W x 2 + 400 W x 1

3 Ch (Bridge 1/2; 3/4) @ 4Ω / 2Ω: 300 W x 2 + 600 W x 1
Adjustable Crossover Yes

CEA Specifications

Output power @ 4Ω, 1% THD+N, 14.4 V 85 W x 4 + 340 W x 1
SN ratio (ref. 1W output) 78 dB

Inputs / Outputs

Pre-In Inputs 0.6 ÷ 6 VRMS (15 kΩ Imp.)
Digital Input Yes
Pre Outputs 6
Hi Level Inputs 8
Low Level Inputs 8
Speaker-In Inputs 2.2 ÷ 22 VRMS (5 Ω Imp.)
Digital IN 1 x Optical S/PDIF; Max 192 kHz / 24 bit + 1 x Optical/Coaxial S/PDIF with optional F2O card
Sub Out (RCA Pre Out) 5V RMS

Digital Signal Processor

Audio DSP Converter Analog Devices ADAU1467 automotive qualified audio processor.

Processing @ 96 kHz.Analog Devices 3 x ADAU1978 (4ch) and ADAU1966A (16ch) A/D and D/A converters (24 bit/192 kHz) providing very high level performance
Filter mode and slope Linkwitz-Riley @ 12/24/36/48 dB/Oct.
Butterworth @ 6/12/18/24/30/36/42/48 dB/Oct.
Bessel @ 6/12/18/24/30/36/42/48 dB/Oct.
Chebyshev @ 6/12/18/24/30/36/42/48 dB/Oct.


QLP @ 6 dB/Oct.
Crossover frequency 20 Hz ÷ 20 kHz
Phase control 0° / 180°, All-Pass filters
Analog Input Equalizer (20 ÷ 20k Hz) 12 Biquad + Delay
Output Equalizer Parametric/Graphic Biquad: 15 poles, 20 Hz ÷ 20 kHz
Time Alignment Distance 0 ÷ 510 cm / 0 ÷ 200.8 inches
Time Alignment Delay 0 ÷ 15 ms
Input Output Real Time Audio Monitor RTA

Control Connections

DRC Port Input for DRC AC remote control (Optional)
ADC Port Manage other Audison devices that support this standard
1 Wire Customizable functions (+ 12 V activated)
2 Wire Customizable functions (+ 12 V activated)

General Requirements

PC connections Micro USB 1.1 / 2.0 / 3.0 Compatible
Software/PC requirements Windows 10, Windows 11 (min. res. 1024 x 768
Ambient operating temperature range 0 °C to 55 °C (32 °F to 131 °F)
Size 240 x 47 x 156 / 9.44 x 1.85 x 6.14
Weight 2.04 kg

Dimensions

AF M5.11 bit
Dimension A 240 mm
Dimension B 156 mm
Dimension C 47 mm

Box Content

USB CABLE
USB CABLE

USB cable to connect Forza bit amplifiers to PC.

Read more
CONTROL CABLE AF bit
CONTROL CABLE AF bit

Provided control interconnection to control memory selection and remote power-on.

Read more
DSP OUT
DSP OUT

6 channels DSP output cable to connect Forza bit amplifier to Forza D amplifier.

Read more
SPK OUT 2CH
SPK OUT 2CH

Provided cable for AF M5.11 bit with two pairs of labeled cables to connect a single voice coil or dual voice coil subwoofer, or two subwoofers.

Read more
PRE IN CABLE 8 CH
PRE IN CABLE 8 CH

Eight stereo RCAs interconnection to connect Forza bit amplifier with after-market sources with PRE-OUT outputs provided with Forza amplifiers.

Read more
SPEAKER IN CABLE 8 CH
SPEAKER IN CABLE 8 CH

Provided cable with 8 pairs of labeled wires to connect Forza bit amplifiers bit with the high-level output of OEM sources.

Read more

Accessories

DRC AC
DRC AC
DRC AC enables primary system control: main volume, secondary volume, source selection, memory selection, global eq.
Read more
C2O
C2O
The C2O interface converts the signals coming from the coaxial digital input and from the analog AUX-IN into a TOSLINK optical digital output signal (up to 24 bit/192kHz). The conversion allows the integration of the new Hi-Res portable devices equipped with coaxial digital output (75 ohm) and smartphones with analog output on 3.5 mm mini Jack (also 4 poles) with Audison processors featuring an optical digital input compatible with the resolution of the signal sent to the C20. Thanks to its extreme compactness, the C20 can be installed in a hidden position on the dashboard, drastically reducing the length of the cabling between the portable player and the receiving device.
Read more
bit DMI
bit DMI
bit DMI is a digital interface for MOST systems, providing the ability to connect the Audison bit processors and the Audison amplifiers, equipped with digital input, to OEM multimedia systems in cars featuring the MOST technology based on optical fibre. Thanks to the digital connection, the signal can be transmitted without loss of quality, keeping the audio controls built in the OEM head unit “ such as volume, balance and tone controls as well as the hands-free kit, navigation system and parking sensors alerts unaltered.
Read more
B-CON
B-CON
Audison B-CON is a Bluetooth 5.0® streaming device designed for automotive use that has obtained the Hi-Res audio wireless certification from JAS (Japan Audio Society). B-CON is the ideal choice for streaming audio from a Hi-Res player (Fiio, Sony Walkman...) and from the latest generation Android/Apple mobile devices. To avoid the loss of resolution that occurs when operating on the volume of the mobile device, B-CON features an absolute volume function to directly control the master volume of the connected Audison processor, ensuring full dynamic range. B-CON can be connected with an Audison AF bit amplifier or the bit One HD Virtuoso to get full Hi-Res streaming performances. B-CON is also fully compatible with the bit Nove processor and the AP bit/AP F8.9 bit amplifiers of the Audison Prima line.
Read more
F2O
F2O

The F2O accessory is a digital input extension card, compatible with the new line of Audison AF bit amplifiers with integrated Dsp.

The card fits the dedicated external slot of the AF bit amplifier and it adds an additional Coaxial S/PDIF or a second Toslink S/PDIF input. The type of additional input can be selected by the switch mounted over the card itself.

In case the Coaxial S/PDIF input is selected, it is possible to use the Coaxial input cable included in the card box.

Read more
F4IN
F4IN

The F4IN accessory is an analog input extension card, compatible with the new line of Audison AF bit amplifiers with integrated Dsp. The card fits the dedicated external slot of the AF bit amplifier and adds four analog high-level input channels to the AF bit native eight, thus reaching twelve high-level (SPK IN) inputs.

With respect to the sensitivity range of the AF bit native eight SPK IN inputs (2.2 ÷ 22 VRMS), the F4IN features 3.2 ÷ 32 VRMS to allow a perfect integration in advanced OEM systems with higher voltages.


Read more
AF LINK CABLE
AF LINK CABLE

AF LINK accessory cable can be connected to have 6 additional channels configurable on the bit Drive software.

Read more
AFBMW ReAMP 3
AFBMW ReAMP 3

This Plug&Play T-Harness provides the ability to install an Audison AF bit amplifier on BMW vehicles equipped with RAM module. It is compatible with "Standard" and "Hi-Fi" sound systems. The OEM seven-channel amplifier is connected via a forty-two pin multipolar connector.

AFBMW ReAMP 3 allows AF Forza user to:

1. Retrieve the OEM source front mid/high, rear mid/high, underseat low-pass, and center signals.
2. Route the AF bit amplifier outputs to each of the OEM amplifier seven channels: (Mid-Hi FL; Mid-Hi FR; WF FL; WF FR; RL; RR; Centre)
   - The Plug&Play terminals enable the user to choose which AF bit output to connect to each of the seven channels of the OEM audio system.
   - It is also possible to bridge the outputs of the AF bit amplifier.
3. Keep the OEM amplifier on.

The AFBMW ReAMP 3 can also be used with the Audison AP F IN ADP accessory (not included in the box) for a full Plug&Play connection to an AP F8.9 bit amplifier.

Read more

Features

  • Improved audio performance and power thanks to the latest generation of ADT (Audison D-Class) technology
  • Unbeatable power/volume ratio up to 0.68 W RMS/cm³ reaching 82% of efficiency
  • Next-generation bit Drive software platform
  • Hi-Res compatibility performance, with an extended audio band up to 40 kHz, made possible by and DSP working operation at 24 bit/96 kHz
  • Maximum versatility thanks to the possibility of using the bridging option for each pair of power outputs
  • Up to 11 output channels (5 amplified, 6 optional pre-outs) controlled by the DSP to expand the system with other amplifiers
  • 8 high/low-level inputs (and an optical Toslink digital input) support total connectivity even with the most complex OEM systems
  • Extension card slot (additional 4 analog or 1 digital inputs)
  • Electrical signal analysis for each input channel ensures proper integration and correction
  • Acoustic analysis (with your USB microphone) integrates the response graph into the equalizer display. This ensures efficient tuning and great sound!
  • Advanced signal routing options allow the technician to go beyond the predefined system definitions in the Configuration Wizard

Technologies

AFBMW ReAMP 3

Next-generation bit Drive software platform – developed for this family of products – simplifies every control and function.

AFBMW ReAMP 3

Native DSP working at 24 bit/96 kHz and an extended audio band up to 40 kHz.

AFBMW ReAMP 3

The acoustic analysis integrates the response graph into the equalizer display ensuring efficient tuning and great sound, compatible with any 24-bit USB microphone.

AFBMW ReAMP 3

The electrical analysis integrates the response graph into the input equalizer display, ensuring efficient tuning.

AFBMW ReAMP 3

Electrical Signal Analysis ensures proper integration and correction for each input channel.

AFBMW ReAMP 3

Enjoy the improved audio performance of the latest generation Audison D-Class technology.

AFBMW ReAMP 3

Maximum versatility thanks to the bridging option for each pair of channels.

AFBMW ReAMP 3

Forza amplifiers have two independent power supplies: the audio amplifier power supply is loosely regulated, which allows superior dynamic performance. The DSP power supply is stiffly regulated, which maintains DSP microprocessor operation even during lower-voltage transient states (i.e., start/stop operation).

AFBMW ReAMP 3

Quick I/O Configuration speeds up system definition and signal routing.

AFBMW ReAMP 3

When connected with Audison B-CON hi-res Bluetooth receiver, this feature manages the Master Volume of the Forza amp thus ensuring full dynamic range signal at the input.

AFBMW ReAMP 3

iDatalink Maestro AR native support for a total integration with OEM infotainment.

AFBMW ReAMP 3

Equipped with eight analog inputs, to support total connectivity even with the most complex OEM systems.

AFBMW ReAMP 3

Automatically sums and reverses OEM equalization.

AFBMW ReAMP 3

Input delay compensation of time-delayed factory outputs prior to signal summing.

AFBMW ReAMP 3

Allows left and right inputs to match in phase before tuning, even if OEM phase processing has been used.

AFBMW ReAMP 3

Universal Speaker Simulator technology on high-level inputs for maximum compatibility with any type of Head-Unit OEM Source.

AFBMW ReAMP 3

11 DSP-processed output channels for total control.

AFBMW ReAMP 3

6 native pre-out channels for maximum versatility.

Home | AFBMW ReAMP 3
audison bitdrive logo

A New, Comprehensive Approach

THE FUTURE OF AUDISON BIT CONFIGURATION SOFTWARE

Audison bit Drive software configures itself for each product allowing it to control bit products we haven’t even imagined yet!

New Graphical User Interface

a technician’s most powerful tool

Improved user controls

for selecting frequency, channel, slope, and bandwidth

Infotip support

hover the cursor overan icon to see its definition

Integrated help

each core functional areacontains one-click guidance

Color-coded linking

of the interface controls to the selected channel keepsthe technician always focusedon the proper channel.

Integrated electrical and acoustic measurement and analysis without leaving the application

(compatible USB microphone required for acoustic RTA function)

Bit Drive is the future.

Even though we’ve modernized the user interface, key operations are still where Audison veteran dealers expect to find them – but info tips for new icons and embedded help files assist first-timers. The Configuration Wizard makes setup faster than ever, and Audison R&D has upgraded the OEM Integration section and the acoustic Tuning controls section with more powerful tools and capabilities.

Initial System Setup
speed equals efficiency

  • Automatic Routing in Configuration Wizard speeds up configuration; manual controls allow unlimited possibilities
  • Auto crossover settings preloaded for Audison speakers
  • Direct entry of distance values supported from the keyboard
  • Options for automatic Input de-Eq, de-time and sensitivity calibration

OEM Integration compare, correct, confirm

  • Electrical RTA onboard with integrated Input channel EQ and Input delay correction
  • Measure, compare and correct the OEM signals for:​
    • Amplitude
    • Phase
    • Polarity
    • Time
Automatic and manual tools to correct and sum OEM signals:
  • De-EQ
  • De-Phase
  • De-Time
Electrical RTA of the outputs signals: measure the output while tuning​
  • Full mixing and polarity control
  • Edit, activate, bridge at any time

Tuning Measure, Manage, Match

  • Improved crossover slope/frequency selection controls
  • Includes Acoustic RTA measurement in the EQ display
  • Compatible with several models of USB microphone and USB sound card
  • Adds cancellation management tools
  • Use the following tools to match Left and Right to the target:
    • Level
    • Polarity
    • EQ – Parametric, Graphic, Phase
    • Notch
    • Shelf
    • Phase all-pass filters
    • Delay
  • Final Tuning EQ for fine-tuning the result without damaging the left/right response symmetry
  • DRC AC functions programming

Register Product

Register your product now to add 1 additional year of warranty coverage.
Register

Subscribe to Audison
newsletter