DSP Amps
Amplifiers
Processors
Speakers
Subwoofers
Subwoofer Box
Accessories
Back
Home | Subwoofer Box | Prima | APBX 10 DS

APBX 10 DS

Subwoofer Box

|

250 mm

|

800 W Peak Power

|

4 + 4 ohm

The APBX 10 DS, a 10 subwoofer loaded in a 12-litres sealed enclosure, is the lineâ„¢s flagship. It is dedicated to the highest performing Prima systems, using the AP1 D amplifier for the sub section. The speakerâ„¢s mechanical excursion of more than 18 mm provides for incredible authority, while the refined Thiele & amp;Small parameters set-up provides the ideal balance for all music genres.

Technical Specs

Size 250 mm
Power Handling - Peak 800 W
Power Handling - Continuous 400 W
Magnet Material HIGH DENSITY FLUX FERRITE
Cone Material WATER REPELLENT PRESSED PAPER

Dimensions

Dimension A 470 mm
Dimension B 334 mm
Dimension C 120 mm

Features

1 Ultra-low profile (5.6 in. / 142 mm) box with sealed design perfectly
tuned to fully exploit the APS 10 D driver.
2 2S² (2 Sides/2 Sounds) design provides the ability to choose between
Down-Firing mounting to increase the low-frequency extension and
Up-Firing install to obtain more punch and definition.
3 Leveling feet with velcro inserts included for a secure grip with the
carpet while maintaining easy removal.
4 SSP (Sub Smart Plug) features both traditional push contacts and a
Plug-&-Play terminal block to easily configure the impedance as
required and provides a quick release.
5 Rounded corners allow easy positioning in the trunk and act as
reinforcement to reduce enclosure resonance.
6 Special designed cone-dustcap-basket geometry which guarantees a
long linear excursion capability (11 mm, one-way).
7 Massive driver motor assembly, optimized with FEM (Finite Element
Modeling) for perfect control under high excursion conditions.
8 Water-repellent pressed paper 10 in. cone, featuring a profile developed
with FEM simulation and optimized with the Klippel Scan Vibrometer.
9 Specifically developed to be combined with either the AP8.9 bit
(2 CH + 2 CH bridged), AP5.9 bit (Sub CH) or AP4.9 bit/AP4 D
(2 CH bridged) amplifiers taking advantage of the bass boost feature
and integrated parametric equalizer of the built-in DSP.
10 Sturdy metal grid included for a total protection of the subwoofer driver.

Subscribe to Audison
newsletter