2 x 500 W @ 2 ohm
|Hi Level Input||No|
|Low Level Input||Yes|
|Power supply voltage / fuse||11 ÷ 15 VDC|
|Idling current||2 A|
|Idling current when off||0.04 mA|
|Consumption @ 14.4 VDC, 2Ω, Max Musical Power||105 A|
|Remote OUT||12 VDC (20 mA)|
|Remote IN||7 ÷ 15 VDC (1 mA)|
|Distortion - THD @ 100 Hz, 4Ω, 70% Rated Power||Distortion - THD @ 1 kHz, 4 Ω; 90% Power: 0.02 %|
|Bandwidth A||(-3 dB, 2 VRMS, 4 Ω): 5 ÷ 70k Hz|
|S/N ratio A||(A weighed @1 V): 106 dBA|
|Damping factor A||(1 kHz, 2 VRMS, 4 Ω): 100|
|Input sensitivity Pre-In||Pre-In sensitivity (two ranges): 0.3 ÷ 4.8 VRMS|
|Pre In Impedance||15 kΩ|
|Total Power RMS||1500 W|
|Minimum load impedance||
|Output Power (RMS) @12.0 ÷ 14.4 VDC, 1% THD||
2 Ch @ 4 Ω 300 W x 2
2 Ch @ 2 Ω 500 W x 2
2 Ch @ 1 Ω 750 W x 2
1 Ch @ 4 Ω 1000 W x 1
1 Ch @ 2 Ω 1500 W x 1
Dual Power Mode - A Class: 2 Ch @ 4 Ω 80 W x 2
|Output power @ 4Ω, 1% THD+N, 14.4 V||Output power @ 4Ω, 1% THD+N, 14.4 V: 300 W x 2 Ch|
|SN ratio (ref. 1W output)||SN ratio (ref. 1W output): 80 dBA|
|Input Type||PRE - S/PDIF (Max 192 kHz / 24 bit) Optical and AD Link|
|Filters Outputs||PRE Bypass / AD Link|
|Filter Pass A||Removable kit: (Hi-pass / Lo-pass / Bandpass 12/24dB) 32 steps 18 ÷ 7.5k Hz with 8 standard & 2 customizable modules|
|Dimension A||510 mm|
|Dimension B||478 mm|
|Dimension C||259 mm|
|Dimension D||160 mm|
|Dimension E||66 mm|
Pure digital signal transfer with a resolution up to 24 bit / 96 kHz
According to the definition of HiRes audio provided by JAS (Japan Audio Society – jas-audio.or.jp), HV venti far exceed the above 40 kHz bandwith analog requirement, providing an astonishing 5 ÷ 75k Hz (@ -3 dB, 2 VRMS, 4 Ω).
Innovation is at the heart of the state-of-the-art digital decoding section. The S/PDIF optical input allows direct connection to digital sources with the ability to re-launch the digital signal to other Thesis amplifiers through the AD Link (Audison DigitalLink) system. Each amplifier features 192 kHz/24 bit PCM D/A conversion through a very high quality converter.
Provides the selection of four possible presets: Energy Saving, Hi-Current, Hi-AB Class and full A Class operation.
Inherited from the HV venti and making the most of TH’s extreme versatility, the complete crossover circuit of the TH amplifier is removable; a high-end sound quality solution.
Four Synchro-PWM power supplies allow for a very fast transient current response and to create a Dual Mono configuration.