Channels | 1 |
Class | A-Class |
Hi Level Input | No |
Low Level Input | Yes |
Digital Input | Yes |
Power supply voltage / fuse | 11 ÷ 15 VDC |
Operating power supply voltage | 11 ÷ 15 VDC |
Idling current when off | 0.04 mA |
Consumption @ 14.4 VDC, 2Ω, Max Musical Power | 132 A |
Remote OUT | 12 VDC (20 mA) |
Remote IN | 7 ÷ 15 VDC (1 mA) |
Distortion - THD @ 100 Hz, 4Ω, 70% Rated Power | 0.01 % |
Bandwidth A | (-3 dB, 2 VRMS, 4 Ω): 5 ÷ 40k Hz |
S/N ratio A | (A weighed @1 V): 106 dBA |
Damping factor A | (1kHz, 4 Ohms): 500 |
Input sensitivity Pre-In | 0.3 ÷ 4.8 VRMS |
Pre In Impedance | 15 kΩ |
Total Power RMS | 1500 W |
Minimum load impedance | 1 Ω |
Output Power (RMS) @14.4 VDC, 1% THD |
• 850 W x 1 (4Ω) • 1500 W x 1 (2Ω) • 2300 W x 1 (1Ω) |
Adjustable Crossover | No |
Output power @ 4Ω, 1% THD+N, 14.4 V | Output power @ 4Ω, 1% THD+N, 14.4 V: 700 W x 1 Ch |
SN ratio (ref. 1W output) | SN ratio (ref. 1W output): 75 dBA |
Input Type | PRE - S/PDIF (Max 192 kHz / 24 bit Optical and AD Link |
Filters Outputs | PRE Bypass / AD Link |
Filter Pass A | Removable kit: (Hi-pass / Lo-pass / Bandpass 12/24dB) 32 steps 18 ÷ 7.5k Hz with 8 standard & 2 customizable modules |
Fuse | 150 A |
Other Fucntions | Linked Amplifiers: Master/Slave Bridged; Slave Chain |
Weight | 10.3 kg |
Pure digital signal transfer with a resolution up to 24 bit / 96 kHz
Innovation is at the heart of the state-of-the-art digital decoding section. The S/PDIF optical input allows direct connection to digital sources with the ability to re-launch the digital signal to other Thesis amplifiers through the AD Link (Audison DigitalLink) system. Each amplifier features 192 kHz/24 bit PCM D/A conversion through a very high quality converter.
Provides the selection of four possible presets: Energy Saving, Hi-Current, Hi-AB Class and full A Class operation.
Inherited from the HV venti and making the most of TH’s extreme versatility, the complete crossover circuit of the TH amplifier is removable; a high-end sound quality solution.
Four Synchro-PWM power supplies allow for a very fast transient current response and to create a Dual Mono configuration.